• Acsip Documentation
  • Acsip EK-S605-32 Documentation
    • Introduction
  • 1 Create a bootable SPI flash
    • 1.1 Histroy
    • 1.2 FAQ
  • 2 Build iwconfig
    • 2.1 Histroy
    • 2.2 FAQ
  • 3 Switch Network Mode
    • 3.1 Histroy
    • 3.2 FAQ
  • 4 Install Toolchain
    • 4.1 Histroy
    • 4.2 FAQ
  • 5 Build upnp 1.9
    • 5.1 Histroy
    • 5.2 FAQ
  • 6 Config SPI 16MB
    • 6.1 Histroy
    • 6.2 FAQ
  • 7 Control gpio
    • 7.1 Histroy
    • 7.2 FAQ
  • 8 Firmware Update from Webpage
    • 8.1 Histroy
    • 8.2 FAQ
  • 9 Enter sleep and power off mode
    • 9.1 Histroy
    • 9.2 FAQ
  • 10 SD Preloader using DS-5
    • 10.1 Histroy
    • 10.2 FAQ
  • 11 Build busybox 1.20.1
    • 11.1 Histroy
    • 11.2 FAQ
  • 12 SD Loader using DS-5
    • 12.1 Histroy
    • 12.2 FAQ
  • 13 Audio Phone Call
    • 13.1 Histroy
    • 13.2 FAQ
  • 14 OV2695 porting
    • 14.1 Histroy
    • 14.2 Introduction
    • 14.3 Porting Steps
  • 15 Turn on HUART
    • 15.1 Histroy
    • 15.2 FAQ
  • 16 wpa_cli Summaries
    • 16.1 Histroy
    • 16.2 FAQ
  • 17 BlueZ
    • 17.1 Histroy
    • 17.2 FAQ
  • 18 Linphone
    • 18.1 Histroy
    • 18.2 FAQ
  • 19 SEGV Debugging
    • 19.1 Histroy
    • 19.2 FAQ
  • 20 Add NVRAM
    • 20.1 Histroy
    • 20.2 FAQ
  • 21 Disable RTC
    • 21.1 Histroy
    • 21.2 FAQ
  • 22 Control UART BLE
    • 22.1 Histroy
    • 22.2 FAQ
  • 23 Build strace 4.8
    • 23.1 Histroy
    • 23.2 FAQ
  • 24 BlueZ Pairing
    • 24.1 Histroy
    • 24.2 FAQ
  • 25 Copy bootable SD
    • 25.1 Histroy
    • 25.2 FAQ
  • 26 Create a bootable SD
    • 26.1 Histroy
    • 26.2 FAQ
  • 27 Create ROMFS
    • 27.1 Histroy
    • 27.2 FAQ
  • 28 Open SPI node in SD booting
    • 28.1 Histroy
    • 28.2 FAQ
  • 29 ADC
    • 29.1 Histroy
    • 29.2 FAQ
  • 30 HTTP
    • 30.1 Histroy
    • 30.2 FAQ
  • 31 USB video device class(UVC)
    • 31.1 Histroy
    • 31.2 FAQ
  • 32 HID
    • 32.1 Histroy
    • 32.2 FAQ
  • 33 UAC
    • 33.1 Histroy
    • 33.2 FAQ
  • 34 DDNS
    • 34.1 Histroy
    • 34.2 FAQ
  • 35 wifitest
    • 35.1 Histroy
    • 35.2 FAQ
  • 36 PWM
    • 36.1 Histroy
    • 36.2 FAQ
  • 37 AE605 Remote Control GPIO
    • 37.1 Histroy
    • 37.2 FAQ
  • 38 Control GPIO’s REG
    • 38.1 Histroy
    • 38.2 FAQ
  • 39 AE605 Remote Control via UART
    • 39.1 Histroy
    • 39.2 FAQ
  • 40 build bc
    • 40.1 Histroy
    • 40.2 FAQ
  • 41 build bash
    • 41.1 Histroy
    • 41.2 FAQ
  • 42 iBeacon Detector
    • 42.1 Histroy
    • 42.2 FAQ
  • 43 Tuning Clock
    • 43.1 Histroy
    • 43.2 FAQ
  • 44 Make A Log
    • 44.1 Histroy
    • 44.2 FAQ
  • Published with bookdown

Acsip EK-S605-32

Acsip EK-S605-32

Ray Os Lee

2017-09-09

Acsip EK-S605-32 Documentation

Introduction

This document will tell you some freuently asked questions and how to do for them. Hope it can help you after reading. Next, you can surf these questions to get a small bliss.

  • Create a bootable SPI flash
  • Build iwconfig
  • Switch Network Mode
  • Install Toolchain
  • Build upnp 1.9
  • Config SPI 16MB
  • Control gpio
  • Firmware Update from Webpage
  • Enter sleep and power off mode
  • SD Preloader using DS-5
  • Build busybox 1.20.1
  • SD Loader using DS-5
  • Audio Phone Call
  • OV2695 porting
  • Turn on HUART
  • wpa_cli Summaries
  • BlueZ
  • Linphone
  • SEGV Debugging
  • Add NVRAM
  • Disable RTC
  • Control UART BLE
  • Build strace 4.8
  • BlueZ Pairing
  • Copy bootable SD
  • Create a bootable SD
  • Create ROMFS
  • Open SPI node in SD booting
  • ADC
  • HTTP
  • USB video device class(UVC)
  • HID
  • UAC
  • DDNS
  • wifitest
  • PWM
  • AE605 Remote Control GPIO
  • Control GPIO’s REG
  • AE605 Remote Control via UART
  • build bc
  • build bash
  • iBeacon Detector
  • Tuning Clock
  • Make A Log